Electric Vehicle Fire Suppression & Containment

  • Safer charging in an enclosed structure (fire is contained)
  • Building is super cooled to help prevent thermal runaway
  • Parking and leaving vehicle while charging is more secure
  • Climate controlled charging
EV in charging container

Made of Heavy Duty Corrosion-Resistant Stainless Steel

Several Size Models Available:

  • 12ft wide x 24ft long x 8ft high
  • 10ft wide x 16ft long x 8ft high
  • 6ft wide x 12ft long x 8ft high

• Independent Lab Tested •

• US Patent Pending •

Operating Instructions

  1. Vehicle enters charging station structure.
  2. Plug vehicle in to charge.
  3. Exit and activate charging. NOTE! Overhead door will close and charging starts.
  4. When charged, disconnect charger from vehicle.
  5. Remove vehicle from the secure charging station

Benefits

  • The EV is protected from weather, damage, and theft
  • The structure is climate-controlled
FIRE CONTAINMENT FOR ELECTRIC VEHICLES
trailer version of EVFSC

Operating Instructions

  1. The Fire Department arrives at the scene and parks between 30 and 50 feet away from the burning vehicle.
  2. Raise the rear door on the trailer
  3. The Firemen will need to remove the safety pins on the cross braces (box tubing) located on the inside of the trailer and rotate 90 degrees to allow the trailer to be backed over the vehicle.
  4. Lower or unsnap the Fire curtain to protect the tires/ 2 hydraulic jacks from fire.
  5. Connect the Fire hose to the connection located at the front of the trailer and START WATER MISTING (18 SPRINKLERS)
  6. Back the Fire Dike Trailer over the burning vehicle.
  7. Raise the trailer with the 3 hydraulic jacks.
  8. Pull the two {2} pins on the axles (One on each side near rear tires).
  9. Close the rear door on the trailer.
  10. Lower the trailer to the ground to prevent flames from under the sides.

The FIRE DIKE TRAILER IS SAFER FOR FIREMEN and the PUBLIC!